	NEW PRODUCTS!

	AKA BRAND

	AUTOSMART

	BIANCHI KEYS

	CAR OPENING TOOLS

	DETERMINATORS

	FRAMON MACHINES

	GM VATS KEYS

	H/S SPACE & DEPTH

	ITL INSERTS

	JET CLONE EQUIPMENT

	JET CLONE KEYS

	JMA Equipment & Crypto 1 & 2 New

	JMA KEYS & CHIPS

	KEY MACHINE PARTS

	KEY MACHINES

	LOCKSMITH BOOKS

	MVP & TOKENS

	NATIONAL AUTO LOCK

	PRO-LOK TOOLS

	RE-FLASH SERVICE

	SHELL KEYS

	SMART KEYS

	STRATTEC KEYS

	STRATTEC KITS

	TCODE Hardware

	TRANSPONDER EQUIP

	TCODE Software

	TOOLS

Search:

Home > FORD >

Ford 10-Cut Determinator

With the Ford 10-Cut Determinator you can quickly and easily obtain a working key for the door lock.
This Determinator works on door locks that contains tumblers in spaces 1-6, 4-8 and 4-9.
It works like a charm and saves you time!!!!
The Ford 10 cut DETERMINATOR set works on all Ford products using the 10 cut system.
When used properly you will be able to generate a key for a vehicle in just a few moments.
There are two different DETERMINATOR sets for the Ford 10 cut system.
One set has 2 keys stamped 123456, used on your basic 10 cut with door spaces 1-6.
The other set has 2 keys stamped 45678 used on the Nissan Quest, Mercury Villager, and some Escorts.
There are 2 keys in each set. One is stamped with an "A" and the other is stamped with a "B".
The "A" DETERMINATOR will trap tumblers with depths of 2 & 3.
The "B" traps tumblers with depths of 4 and 5.
Cut all `A" cuts to a 2 1/2 depth, and cut all "B" cuts to a 4 1/2 depth.
The result is a custom half-cut tryout key.

THE TOOL
The DETERMINATOR is a decoding tool and a tumbler release tool.
The DETERMINATOR has numbers stamped on both sides of the blade. These numbers correspond to the tumbler space locations.
When the tool is inserted into the look, the number closest to the face of the lock indicates the space which is being determined.
When the DETERMINATOR traps a tumbler you will use the spring steel release tool to raise the tumbler and withdraw the DETERMINATOR to the next tumbler location.
Slide the release tool along the slot in the side of the tool, sloped end first.
You will feel it raise the tumbler, slowly pull the DETERMINATOR out a little to the next space and remove the release tool.